2013 CATERPILLAR 420F IT
Backhoe Loader
2013 CATERPILLAR 420F IT
Shipping calculatorZIP quote
Shipping calculator
Financing estimatePayment range
Monthly plan: $0
Estimate only. Final financing terms may vary.
Apply for financing
Equipment Specifications
CategoryBackhoe Loader
Year2013
MakeCATERPILLAR
Model420F IT
SerialCAT0420FPJWJ01069
Hours5124
Features4 X 4, CATERPILLAR C4.4 ACERT 4 CYL TURBO DIESEL, CAB WITH HEAT, A/C, STEREO, AUTOSHIFT, RIDE CONTROL, PILOT CONTROLS, X-HOE, REAR AUX HYD, HYD THUMB, REAR COUPLER, REAR BUCKET WITH TEETH, FRONT AUX HYD, FRONT HYD COUPLER, FRONT GP BUCKET WITH BOCE, METER READS 5124 HOURS, S/N CAT0420FPJWJ01069
Equipment Details
Bring ultimate structural versatility, heavy-duty earthmoving power, and unmatched tool-carrier capability to your fleet with this exceptionally clean, highly optioned 2013 Caterpillar 420F IT 4x4 backhoe loader. Showing 5,124 original operating hours on the meter, this machine represents Caterpillar's premium Integrated Toolcarrier (IT) configuration?highly prized by utility contractors, municipalities, and site-prep crews for its parallel-lift loader linkage, dual hydraulic couplers, and advanced pilot control system.
At its core is a high-torque Caterpillar C4.4 ACERT 4-cylinder turbo diesel engine built to handle brutal excavation and loading cycles. Outfitted with an automatic Autoshift transmission, an Extendahoe (X-Hoe) arm, a factory hydraulic thumb, and both front and rear auxiliary hydraulics, this heavily optioned machine is configured to run complex hydraulic attachments on both ends simultaneously.
Key Technical Specifications:
Model Year: 2013
Hours: 5,124 (Genuine, well-maintained original hours)
Serial Number: CAT0420FPJWJ01069
Engine: Caterpillar C4.4 ACERT 4-Cylinder Turbo Diesel (Delivers exceptional torque rise, high fuel efficiency, and rapid hydraulic cycling under heavy drawbar loads).
Transmission: Premium Autoshift Transmission (Automatically matches engine load to the perfect gear range, maximizing travel speeds up to 25 mph and smoothing out roading transitions).
Drivetrain: Heavy-Duty 4x4 (4-Wheel Drive) system providing absolute tractive effort in muddy conditions, deep sand, or unlevel grade.
Integrated Toolcarrier (IT) Front Loader Infrastructure:
Front Hydraulic Coupler: Factory-equipped with an Integrated Toolcarrier hydraulic front quick coupler, enabling the operator to instantly switch from a bucket to pallet forks, sweepers, or boom arms from inside the cab.
Loader Bucket: Multi-purpose Front GP (General Purpose) Bucket complete with a heavy-duty, bolt-on cutting edge (BOCE) to maximize bucket lifespan.
Front Auxiliary Hydraulics: Plumbed with front-end auxiliary lines to seamlessly run dynamic hydraulic attachments like 4-in-1 combination buckets or hydraulic brooms.
Advanced Rear Excavating & Hydraulic Thumb Package:
X-Hoe (Extendahoe): Features Cat?s factory extendable dipper stick, drastically increasing your vertical digging depth, horizontal reach, and loading height when working around deep utility lines or high-sided dump trucks.
Hydraulic Thumb: Upgraded with a heavy-duty Caterpillar Hydraulic Thumb powered via precise joystick controls?an absolute necessity for cleanly grabbing, sorting, and loading concrete debris, tree roots, and large stones.
Rear Auxiliary Hydraulics & Coupler: Equipped with secondary rear auxiliary lines alongside a mechanical rear quick coupler for fast, straightforward bucket swaps. Includes a heavy-duty rear excavating bucket fitted with aggressive digging teeth.
Deluxe Operator Station & Ride Control:
Enclosed Cab: Premium factory-enclosed ROPS/FOPS operator cab complete with high-output Air Conditioning, Heating, and an integrated stereo system for all-season comfort.
Pilot Joystick Controls: Low-effort, seat-mounted hydraulic pilot joysticks. These adjust with the operator's seat and toggle fluidly, giving you the precise, excavator-style control needed for fine grading around existing utilities.
Ride Control System: Integrated factory Hydraulic Ride Control (Acts as a shock absorber for the loader arms during road transport or high-speed load-and-carry operations, drastically reducing machine lope/bounce, retaining material in the bucket, and ensuring a smooth ride).
? Dealer Note: The Caterpillar 420F IT is widely regarded as the most versatile, high-resale-value backhoe loader in the 14-foot size class. Finding a true "IT" model with 5,124 hours that is fully spec'd with an Autoshift transmission, Ride Control, an Extendahoe, and a hydraulic thumb is an exceptional fleet opportunity. This machine has been fully multi-point workshop-inspected, hydraulic flow-tested, and fluid-checked. It is 100% turn-key and ready to report directly to your next utility project today!
At its core is a high-torque Caterpillar C4.4 ACERT 4-cylinder turbo diesel engine built to handle brutal excavation and loading cycles. Outfitted with an automatic Autoshift transmission, an Extendahoe (X-Hoe) arm, a factory hydraulic thumb, and both front and rear auxiliary hydraulics, this heavily optioned machine is configured to run complex hydraulic attachments on both ends simultaneously.
Key Technical Specifications:
Model Year: 2013
Hours: 5,124 (Genuine, well-maintained original hours)
Serial Number: CAT0420FPJWJ01069
Engine: Caterpillar C4.4 ACERT 4-Cylinder Turbo Diesel (Delivers exceptional torque rise, high fuel efficiency, and rapid hydraulic cycling under heavy drawbar loads).
Transmission: Premium Autoshift Transmission (Automatically matches engine load to the perfect gear range, maximizing travel speeds up to 25 mph and smoothing out roading transitions).
Drivetrain: Heavy-Duty 4x4 (4-Wheel Drive) system providing absolute tractive effort in muddy conditions, deep sand, or unlevel grade.
Integrated Toolcarrier (IT) Front Loader Infrastructure:
Front Hydraulic Coupler: Factory-equipped with an Integrated Toolcarrier hydraulic front quick coupler, enabling the operator to instantly switch from a bucket to pallet forks, sweepers, or boom arms from inside the cab.
Loader Bucket: Multi-purpose Front GP (General Purpose) Bucket complete with a heavy-duty, bolt-on cutting edge (BOCE) to maximize bucket lifespan.
Front Auxiliary Hydraulics: Plumbed with front-end auxiliary lines to seamlessly run dynamic hydraulic attachments like 4-in-1 combination buckets or hydraulic brooms.
Advanced Rear Excavating & Hydraulic Thumb Package:
X-Hoe (Extendahoe): Features Cat?s factory extendable dipper stick, drastically increasing your vertical digging depth, horizontal reach, and loading height when working around deep utility lines or high-sided dump trucks.
Hydraulic Thumb: Upgraded with a heavy-duty Caterpillar Hydraulic Thumb powered via precise joystick controls?an absolute necessity for cleanly grabbing, sorting, and loading concrete debris, tree roots, and large stones.
Rear Auxiliary Hydraulics & Coupler: Equipped with secondary rear auxiliary lines alongside a mechanical rear quick coupler for fast, straightforward bucket swaps. Includes a heavy-duty rear excavating bucket fitted with aggressive digging teeth.
Deluxe Operator Station & Ride Control:
Enclosed Cab: Premium factory-enclosed ROPS/FOPS operator cab complete with high-output Air Conditioning, Heating, and an integrated stereo system for all-season comfort.
Pilot Joystick Controls: Low-effort, seat-mounted hydraulic pilot joysticks. These adjust with the operator's seat and toggle fluidly, giving you the precise, excavator-style control needed for fine grading around existing utilities.
Ride Control System: Integrated factory Hydraulic Ride Control (Acts as a shock absorber for the loader arms during road transport or high-speed load-and-carry operations, drastically reducing machine lope/bounce, retaining material in the bucket, and ensuring a smooth ride).
? Dealer Note: The Caterpillar 420F IT is widely regarded as the most versatile, high-resale-value backhoe loader in the 14-foot size class. Finding a true "IT" model with 5,124 hours that is fully spec'd with an Autoshift transmission, Ride Control, an Extendahoe, and a hydraulic thumb is an exceptional fleet opportunity. This machine has been fully multi-point workshop-inspected, hydraulic flow-tested, and fluid-checked. It is 100% turn-key and ready to report directly to your next utility project today!
